Single CR8BR Inch Series cam follower caged retainer, high-carbon steel crowned outer ring, shielded hex head stud, #10-32 UNF thread, 1/2 in (12.70 mm) roller, 11/32 in (8.73 mm) width

Single caged CR8BR cam follower with shielded hex head
✔️ 1/2 in (12.70 mm) roller, 11/32 in (8.73 mm) width, #10-32 UNF stud

This is a single CR8BR caged cam follower, a shielded inch-series bearing with a hex head stud, made for cam tracks, conveyor guides and linear slide unit applications in industrial and automation gear.

✅ Material: High carbon steel, caged retainer, crowned outer ring
✅ Roller diameter: 1/2 in (12.70 mm), roller width: 11/32 in (8.73 mm)
✅ Stud diameter: 4.826 mm (0.190 in), thread: #10-32 UNF, thread length: 1/4 in (6.35 mm)
✅ Dynamic load capacity: 2520 N, Static load capacity: 2140 N
✅ Enclosure: Shielded, head type: Hex, model: CR8BR (CR-B Inch Series)
✅ Temp range: -20 to 120 deg C, weight: 0.020 lb (0.0091 kg), single bearing pack
✅ Works with sealed ball bearing housings and linear slide unit setups; this is a steel part, not ceramic

💡 What is a cam follower used for in linear slide unit and motion transfer applications? A cam follower is a purpose-built rolling element that follows cam surfaces or guides motion where radial load and repeatable tracking are needed. This short guide explains why they are handy and where they fit: - Designed for guided rolling contact in conveyors, indexing mechanisms and linear slide unit systems, improving repeatability and wear life - Compatible with sealed ball bearing housings and bearing blocks like pillow block bearing setups for easier mounting and maintenance - Chosen over plain bearings when you need lower friction, higher dynamic load capacity and better heat performance in industrial motion transfer