7013CYDUP4 Nachi Angular Contact Bearing 65x100x18 Abec-7 Bearings
UPC: 00193019091777
Type: Nachi Angular Ball Bearings
Cage: Polyamide resin cage
Quality: ABEC-7 (P4 quality)
Dimensions: 65mm x 100mm x 18mm/Metric
| High Precision Ball Bearings 7013CYDUP4 Nachi Angular Ball Bearings 15 degrees Contact Angle Abec-7 65mm x 100mm x 18mm Made in Japan |
|
7013CYDUP4 Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.
|
|||||||||||||||||||||||
The raceways of both the inner and outer rings of this bearing type are made out of a contact angle that was established. These bearings are non-separable. Considering that the balls are added utilizing structure, a number of balls can be set up than in the instance of Deep-groove ball bearings. Standard cage materials may be scraped on high-strength metal steel, or resin. Cage material depends upon the bearing series and or service requirement. Single-row Angular Contact ball bearings can sustain heaps any load has to be in 1 direction. This bearing type is generally utilized to deal with the load caused by the internal axial force generated by the radial load that was applied. When mounting two single bearings in adjacent places, NACHI supplies these mix parts (pairs) with pre-adjusted clearance. Mix bearings are matched sets. Combination or paired bearings can be ordered BACK-TO-BACK (DB), FACE-TO-FACE (DF), or even in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.