7007CYDUP4 Nachi Angular Contact Bearing 35x62x14mm ABEC-7 Bearing
UPC: 00193019091722
Type: Nachi Angular Ball Bearings
Cage: Polyamide resin cage
Quality: ABEC-7 (P4 quality)
Dimensions: 35mm x 62mm x 14mm/Metric
| High Precision Ball Bearings 7007CYDUP4 Nachi Angular Ball Bearings 15 degrees Contact Angle Abec-7 35mm x 62mm x 14mm Made in Japan |
|
7007CYDUP4 Nachi is a high precision Angular contact pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.
|
|||||||||||||||||||||||
The raceways of both the inner and outer rings of this bearing kind are made with a contact angle that was established. These bearings are non-separable. Because the balls are inserted utilizing construction, a bigger quantity of balls may be installed than in the case of ball bearings. Standard cage materials could possibly be pressed high-strength metal, steel artificial or resin. Cage material is dependent on the bearing series and or service requirement. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads any axial load has to be in one direction. This bearing type is normally utilised to handle the load caused by the axial force created by the load that was applied. When mounting two bearings in adjacent places, NACHI supplies these mix components (pairs) with pre-adjusted clearance. Combination bearings are paired places. Bidirectional axial loads can be sustained by DF or DB sets.
đź’ˇ Que signifie ABEC-7?
ABEC-7 est une classification de haute précision du Comité des ingénieurs en roulements annulaires (ABEC), indiquant des tolérances de fabrication extrêmement strictes. Ces roulements offrent des performances ultra-lisses et à faible friction et sont souvent utilisés dans des applications à grande vitesse et haute précision.
Les roulements ABEC-7 se retrouvent couramment dans les instruments de précision, les équipements aérospatiaux, les moteurs électriques haut de gamme et les machines industrielles exigeantes. Ils offrent des performances exceptionnelles, mais sont généralement plus coûteux en raison du niveau de précision impliqué.