Nachi

7018CYP5 Nachi Angular Contact Bearing 90x140x24:Abec-5:Japan

 
$1,181.57
SKU: Kit10801
UPC: 00193019091012
Item: 7018CYP5 Angular Ball Bearings
Dimensions: 90*140*24 mm/Metric
ID (inner diameter)/Bore=90mm
OD (outer diameter D1)=140mm
Width/Height/thickness=24mm
 

Nachi Angular Ball Bearings
7018CYP5
90mm x 140mm x 24mm
15 Contact Angle
Polyamide resin cage
Abec-5
Made in Japan







7018CYP5 Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-5 Made in Japan, here are the dimensions of the 7018CYP5, the 7018CYP5 inner diameter is 90mm, the 7018CYP5 outer diameter is 140mm, 7018CYP5 width is 24mm.

  • Item: 7018CYP5 Angular Ball Bearings
  • Dimensions: 90*140*24 mm/Metric
  • ID (inner diameter)/Bore=90mm
  • OD (outer diameter D1)=140mm
  • Width/Height/thickness=24mm
  • 7018CYP5 Type: Nachi Angular Ball Bearings
  • Cage: Polyamide resin cage
  • Quality: ABEC-5
  • Basic Dynamic Load Cr (KN): 72.0
  • Size: 90mm x 140mm x 24mm
  • Made in Japan
  • Quantity: One Bearing 7018CYP5
d D B r r1 Basic Dynamic Load
90mm 140mm 24mm 1.5 1 72.0

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.