Nachi

7209BMU Nachi Angular Contact Bearing Brass Cage C3 45x85x19 Bearings

 
$139.58
SKU: Kit9974
UPC: 00193019105849
Item: 7209BMU Nachi Ball Bearing
Type: Nachi Angular Ball Bearing
Cage: Brass Cage
Radial Clearance: C3
Dimensions: 45mm x 85mm x 19mm/Metric
 
7209BMU Nachi Angular Ball Bearing
40 Contact Angle
Brass Cage & Flush Ground
45mm x 85mm x 19mm
Made in Japan


7209BMU Nachi Angular Ball Bearing, bearing is 40 Contact Angle, Brass Cage and Flush Ground, Made in Japan, inner diameter is 45mm, outer diameter is 85mm and width is 19mm.

  • Item: 7209BMU Nachi Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Brass Cage
  • Radial Clearance: C3
  • Dimensions: 45mm x 85mm x 19mm/Metric
  • ID (inner diameter)/Bore: 45mm
  • OD (outer diameter): 85mm
  • Width/Height/thickness: 19mm
  • Size: 45 x 85 x 19 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 37,000 N
  • Static load rating Cor: 27,100 N
  • Limiting Speed:
    • Grease Lubrication: 6,300 RPM
    • Oil Lubrication: 8,500 RPM
  • Made in Japan

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.