BNH007TU Nachi Angular Contact Spindle Bearing 35x62x14 ABEC 7
UPC: 00193019092132
Type: Nachi Angular Spindle Ball Bearing
Cage: Phenolic cage
Quality: ABEC-7
Dimensions: 35mm x 62mm x 14mm/Metric
High Precision Ball Bearing BNH007TU Nachi High Speed Angular Spindle Ball Bearing 15 degrees Contact Angle Abec-7 35mm x 62mm x 14mm Made in Japan |
BNH007TU Nachi High Speed Angular Spindle bearing, bearing is Super precision Angular with 15 degrees contact angle and Phenolic cage, bearing is ABEC-7 quality and made in Japan, inner diameter is 35mm, outer diameter is 62mm and width is 14mm.
|
The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.