Nachi

BNH008TU Nachi Angular Contact Spindle Bearing 40x68x15 ABEC 7

 
$376.46
SKU: Kit10933
UPC: 00193019092149
Item: BNH008TU Nachi Ball Bearing
Type: Nachi Angular Spindle Ball Bearing
Cage: Phenolic cage
Quality: ABEC-7
Dimensions: 40mm x 68mm x 15mm/Metric
 
High Precision Ball Bearing
BNH008TU Nachi High Speed Angular
Spindle Ball Bearing
15 degrees Contact Angle
Abec-7
Made in Japan


BNH008TU Nachi High Speed Angular Spindle Bearing, Ball Bearing Super is precision Angular with 15 degrees contact angle and Phenolic cage, bearing is ABEC-7 quality and made in Japan. BNH008TU inner diameter is 40mm, BNH008TU outer diameter is 68mm, BNH008TU width is 15mm.

  • Item: BNH008TU Nachi Ball Bearing
  • Type: Nachi Angular Spindle Ball Bearing
  • Cage: Phenolic cage
  • Quality: ABEC-7
  • Dimensions: 40mm x 68mm x 15mm/Metric
  • ID (inner diameter)/Bore: 40mm
  • OD (outer diameter): 68mm
  • Width/Height/thickness: 15mm
  • Size: 40 x 68 x 15 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 14,800 N
  • Static load rating Cor: 12,900 N
  • Limiting Speed:
    • Grease Lubrication: 22,000 RPM
    • Oil Lubrication: 32,000 RPM
  • Made in Japan


Dimensions
d D B r r1
40mm 68mm 15mm 1mm 0.6mm

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.