Carbide Tipped Chucking Reamer With Six Straight Flutes Five Eighths Inch Loc And Eight Inches Overall Length Resharpened By Original Owners Reduced Body Behind Carbide Tip For Extra Reach Lead In Chamfer.054 Inches

Carbide tipped chucking reamer with 6 flutes, 8 in OAL
✔️ 1-piece, reshaped by original owners, 5/8 LOC, chamfer.054 in

This carbide-tipped chucking reamer is designed for metalworking projects requiring precise hole finishing. It features six straight flutes, 5/8 in LOC (15.875 mm) and 8 in overall length (203.2 mm) for extra reach. The body behind the carbide tip was reduced by the original owners to extend reach while maintaining cutting power. The lead-in chamfer is 0.054 in (1.37 mm) to ensure smooth entry.

✅ Six straight flutes for clean hole finishes
✅ 5/8 in LOC (15.875 mm) for accurate depth control
✅ 8 in overall length (203.2 mm) for extra reach
✅ Lead-in chamfer 0.054 in (1.37 mm) for smooth entry
✅ Carbide tipped edge provides long wear life and sharpness

💡 What is a carbide tipped chucking reamer used for in metalworking?

In metalworking, this tool is handy for finishing drilled holes to tight tolerances while keeping straightness and concentricity. It’s a go-to for hard materials where precise hole size matters, and it helps extend tool life with a sharp carbide edge.

- Handy for finishing drilled holes with tight tolerances in steel and other hard metals
- Maintains concentricity and straightness during drilling and reaming operations
- Great for long-wear performance with proper lubrication and controlled feeds